Advanced Filters
Location
Category
Manufacturer
Model
Condition
Inventory
2021 BIGLIA B-750/SY
CNC Control: FANUC Series 32i-MODEL B | Max swing over the bench: Ø 680 mm | Max swing over the carriage: Ø...
Details
Details
- CNC Control
- FANUC Series 32i-MODEL B
- Max swing over the bench
- Ø 680 mm
- Max swing over the carriage
- Ø 680 mm
2008 MORI SEIKI NL-2000Y 500
CNC Control: Mori Seiki MSX-850III | Max swing over the bench: Ø 579,8 mm ( Ø 923,8 mm senza interferenza c...
Details
Details
- CNC Control
- Mori Seiki MSX-850III
- Max swing over the bench
- Ø 579,8 mm ( Ø 923,8 mm senza interferenza carter frontale)
- Max swing over the carriage
- Ø 579,8 mm ( Ø 755 mm senza interferenza carter frontale)
2018 TAKISAWA-JAPAN TS-4000YS
CNC Control: FANUC Series 32i-TB | Max swing over the carriage: Ø 600 mm | Max turning diameter: Ø 315 mm
Details
Details
- CNC Control
- FANUC Series 32i-TB
- Max swing over the carriage
- Ø 600 mm
- Max turning diameter
- Ø 315 mm
2011 MORI SEIKI NL-1500SY/500
CNC Control: Mori Seiki MSX-850III | Max swing over the bench: Ø 579,8 mm ( Ø 923,8 mm senza interferenza c...
Details
Details
- CNC Control
- Mori Seiki MSX-850III
- Max swing over the bench
- Ø 579,8 mm ( Ø 923,8 mm senza interferenza carter frontale)
- Max swing over the carriage
- Ø 579,8 mm ( Ø 755 mm senza interferenza carter frontale)
2011 MORI SEIKI NL-2500SY/700
CNC Control: Mori Seiki MSX-850 IV | Max swing over the bench: 579,8 mm | Max swing over the carriage: 755 mm
Details
Details
- CNC Control
- Mori Seiki MSX-850 IV
- Max swing over the bench
- 579,8 mm
- Max swing over the carriage
- 755 mm
Hyundai WIA L-300/MSA
CNC Control: FANUC Series 32i-MODEL A | Max swing over the bench: Ø 750 mm | Max swing over the carriage: Ø...
Details
Details
- CNC Control
- FANUC Series 32i-MODEL A
- Max swing over the bench
- Ø 750 mm
- Max swing over the carriage
- Ø 480 mm
Hyundai WIA LM-1800/TTSY
MACHINE REFURBISHED AS FOLLOWS:
- Both turret 1 and turret 2 refurbished with new seals and bear...
Details
Details
- CNC Control
- FANUC Series 31i-MODEL A
- Dimensions machine
- Length: 4.600 mm Width: 2.100 mm Height: 2.050 mm
- Max swing over carriage (upper / lower)
- N°1: Ø 290 mm / N°2: Ø 290 mm
2001 Comev Leonardo CM 300x2000
CNC Control: D.Electron CN-Z32 | Center height: 300 mm | Max swing over the bench: Ø 600 mm | Max swing ove...
Details
Details
- CNC Control
- D.Electron CN-Z32
- Center height
- 300 mm
- Max swing over the bench
- Ø 600 mm
FRONT TWO SPINDLES CNC LATHES DOOSAN
MACHINE WITH OPTICAL SCALE MAKE HEIDENHAIN FOR THE AXES X1/X2/Z1/Z2 Make: DOOSAN | Model: PUMA H-310/TM
Details
Details
- Make
- DOOSAN
- Model
- PUMA H-310/TM
- Category
- FRONT TWO SPINDLES CNC LATHES
2006 Nakamura Tome WT-300 MMSY
CNC Control: FANUC 18i-TB | Max swing over the bench: Ø 310 mm | Max turning diameter: Ø 270 mm | Max turni...
Details
Details
- CNC Control
- FANUC 18i-TB
- Max swing over the bench
- Ø 310 mm
- Max turning diameter
- Ø 270 mm
2018 Hwacheon T2-2T YSMC
CNC Control: SIEMENS SINUMERIK 840-D | Max swing diameter over bed: Ø 880 mm | Max turning diameter (spindl...
Details
Details
- CNC Control
- SIEMENS SINUMERIK 840-D
- Max swing diameter over bed
- Ø 880 mm
- Max turning diameter (spindle / sub-spindle)
- Ø 460 mm / Ø 390 mm
2003 Mori Seiki ZL-203/SMC
CNC Turning Center refurbished as following list:
- Turret 1 bearings and seals
- Turret 2 beari...
Details
Details
- Manufacturer
- Mori Seiki
- Model
- ZL-203/SMC
- Category
- CNC Lathes
- Year
- 2003
2001 Daewoo PUMA 230C
Controllo cnc: FANUC SERIES 18i-T | Peso macchina: 4,3 Ton | Max diametro rotante sul banco: Ø 510 mm
Details
Details
- Controllo cnc
- FANUC SERIES 18i-T
- Peso macchina
- 4,3 Ton
- Max diametro rotante sul banco
- Ø 510 mm